Situation
Your project pipeline includes commercial storage, peak shaving, or backup power tenders that call for a complete energy storage system – not a bill of materials to integrate across multiple suppliers.
The Challenge
Sourcing cells, BMS, enclosures, and thermal design from separate vendors stretches qualification across months. Interface mismatches between the battery and BMS surface late during commissioning – when schedule and budget are least able to absorb them.
How do you deploy a 100 kWh commercial storage system with integrated thermal management and factory-matched BMS – without running a multi-vendor integration project?
Our Answer
The SSLBATT air-cooled 100 kWh storage system arrives as one pre-integrated SKU: Grade A LiFePO4 cells, factory-matched BMS, air-cooled thermal management, and enclosure delivered together. One factory owns the complete system, so qualification, commissioning support, and warranty sit with a single responsible party – reducing integration risk and qualification timeline.
Pre-Integrated Architecture
Cells, BMS, contactors, thermal units, and mounting are matched and tested at the factory before shipment – not integrated for the first time on your site.
Air-Cooled Thermal Design
Forced air handling holds cell temperature within operating envelope under moderate-cycle duty – cost-efficient for indoor and sheltered outdoor builds without the complexity of a liquid loop.
Single-Factory Warranty
System-level warranty from one manufacturer replaces component-by-component claims. Commissioning support and documentation ship with the system.
System Composition
View specifications
| Included in System | Specification |
|---|---|
| Integrated LiFePO4 cells | Grade A prismatic, factory-matched capacity and impedance |
| BMS | CAN/RS485, overcurrent/short/thermal protection, cell monitoring |
| Thermal management | Forced air handling, temperature envelope enforced |
| Enclosure & contactors | IP55 cabinet with DC contactors and protection fusing |
| Fire suppression | System-level fire suppression provisions (industry-standard for C&I ESS) |
| Documentation | CE, UN38.3, MSDS + commissioning checklist |
Not Included: Power cables, PCS/EMS, site-level electrical work, and installation tooling are specified separately during the technical review.
Engineering Integration Notes
Thermal & Mechanical Design
View specifications
| Design factor | Operational effect |
|---|---|
| Air-cooled handling | Cost-efficient for moderate-cycle indoor and sheltered outdoor duty |
| IP55 enclosure | Dust and splash protection without a liquid loop |
| Serviceable rack layout | Standard access for cell, BMS, and fan maintenance |
| Footprint | Cabinet form factor sized to standard logistics and site access |
Electrical Integration
View specifications
| Validation item | Why it matters |
|---|---|
| CAN/RS485 protocol mapping | Pre-configured to your PCS/inverter before shipment |
| Contactor and fuse protection | Overcurrent and short-circuit isolation at system level |
| BMS parameter alignment | Tuned to your dispatch profile to avoid nuisance trips |
Compliance and EU Delivery
CE, UN38.3, and MSDS documentation is included with every system. Systems are made to order and shipped DDP per project, with documentation aligned during technical review.
